This 3" Slayer Ceramic bond diamond floor disc is from the set for polishing concrete slabs. This is the 100 grit pad which is used on floor machines and auto-scrubbers for beginning the polishing process. These have a very long life and while they do not last forever, it is close :). Used in series from 30 through 400 grit they will bring the floor to a low gloss finish. If a higher gloss is desired you can then use resin discs and/or polishing compound to get the stone to pop.
This is a very high quality product and like products sell for up to 50% more than our offer. They are normally used in sets of 6 or 9 pieces at a time depending on your machine.
They can be run wet or dry and they have no heating Velcro problem. That being said, if you run them wet they do leave a much better finish, even with minimal water.
- Fast work
- Long life for hard concrete
- Over 26 MPA
- Weighs 150 gram per piece
3 Inch Slayer Ceramic Bond Floor Disc - 100 Grit
- Brand: Slayer Diamond
- Product Code: SL3CBFD100
- Availability: In Stock