These are the 3″ Slayer Ceramic bond diamond floor discs for polishing concrete slabs.
These pads are very good for hard concrete. They are available in 30 grit, 50 grit, 100 grit, 200 grit and 400 grit.
They can be used to remove deep scratches and bring the floor to a low gloss finish. If a higher gloss is desired you can then use resin discs and/or polishing compound to get the stone to pop.
This quality is same as SASE product which cost considerably more.
They measure 3”X 12mm with aluminum base.
They can be run wet or dry and they have no heating Velcro problem. That being said, if you run them wet they do leave a much better finish, even with minimal water.
- Fast work
- Long life for hard concrete
- Over 26MPA
- Weighs 150 gram per piece
