If you’re looking for a quick, easy, and effective way to install your new undermout sink, you’re in the right place. Our undermount sink bracket kits make installing an undermount sink so easy that even the first time do-it-yourselfer can achieve professional results, on the first try. With a fully adjustable design their perfect for installing undermount sinks of all sizes and since they attach to the cabinets, they eliminate any chance of damaging your expensive countertop.
Undermount sinks allow you to create a more modern look and feel in your bathroom and kitchen by placing the sink beneath the counter. In addition, having your sink under the counter will minimize the amount of debris that often builds up around drop in sinks by allowing it to flow into the sink and making it easier to clean. When installed properly, your new undermount sink will provide leak-free use for many years to come.
Traditionally when installing an undermount sink, you have two choices. The first is to remove your counter and place it upside down on a flat surface. The second is to place a 2-by-4 across your counter top and try to align your sink using several clamps. Both choices offer many chances for error and require drilling holes in the bottom of your counter top, which may result in cracking and damaging it. In many cases, these traditional installs will also require epoxies that take a long time to set before you can attach plumbing fixtures and complete your install.
Not anymore, with our undermount sink installation kits you can quickly, safely, and effectively complete your sink installation without risking damage to your expensive countertop. These kits will still require that you have properly cut holes in your counter that match your sink and fixtures. You’ll still have to make sure you have clean surfaces, free of debris that may interfere with bonding. However, the similarities stop there. The mounting brackets included in our kits are designed to attach to the inside of your cabinets, not your counter, eliminated the need to drill holes and possibly damage your counter. Once you’ve installed the brackets, insert your sink, apply an even bead of silicone, and use the adjustable placement screws to raise your sink into its proper place. Clean up any excess silicone, install your fixtures, and you’re done.
If you need additional information or advice for your undermount sink installations, contact us, we’re always happy to help. If you have a large number of installations to complete, we always offer discounts for bulk purchases.