The Nano 1 1/4" high speed dry cutting core bits will dry cut through granite slabs in just seconds. In our tests on different 2 cm slabs this core bit ran at approximately 16 seconds per hole. This bit has brazed diamonds on the inside and the outside of the barrel to give you cleaner holes while trimming down the core for easier core ejection. The brazing also reduces heat build up on the core barrel.
This diamond core bit can be run wet or dry and will drill over a hundred holes in granite, marble or engineered stone at incredibly fast cutting speeds! If you fabricate granite counter tops, this diamond coring bit is for you! This high speed core bit can be used to drill through materials as thick as 60mm.
- Super fast cutting speeds
- Dry or wet cutting
- 5/8"-11 threaded arbor
- High speed - run up to 12,000 RPM
- Diamond brazed on both sides of barrel
Nano 1 1/4 Inch Segmented Core Bit with Brazed Barrel
- Brand: Nano
- Product Code: NCBV1250
- Availability: In Stock