Product Catalog
  • Bench saw model AFR300C-CE 1-phase 2.2KW 230V 60Hz 3400rpm

Achilli AFR 300 C Manual Bridge Saw 10' Cut for Granite, Engineered Stone, Marble, Ceramic, and Porcelain Materials. Free Freight. Free Blade

Achilli AFR 300 C Granite and Stone Bridge Saw is an outstanding wet cutting bridge saw for straight cutting, miter cutting, length cutting, cross cutting granite, marble, quartz, concrete, slabs and counter tops.

The AFR 300 C Granite Bridge Saw is a manual hand crank feed bridge wet saw. Although it is a hand crank it only takes just about 10 turns to reach across the full 10 foot cutting length.

The AFR 300 C Bridge Saw can cut up to 4" thick materials. 

The AFR accepts a 10", 12", and 14" blade allowing a variety of cutting depths on many different materials such as granite, marble, engineered stone, ceramic, porcelain, concrete, glass, etc.

The AFR 300 C Stone Bridge Saw comes with 2 side extension tables that offer support for full slabs of stone. The side extension tables can be mounted on both sides of the saw.

The AFR 300 C Bridge Saw comes fully assembled. After taking it out of the shipping crate, simply slide attach the legs, wire 220 single phase, mount the blade and side extension tables and start cutting.

The AFR 300 C Bridge Saw is powered by a robust 3 HP (3400 rpm) motor that allows easy cutting of 2cm and 3cm stone without ever slowing down or over working the motor.

X- Axis movement down the bridge of the saw is powered by manual crank.
Y- Axis blade height adjustment is powered by a hand crank directly on top of the motor and blade. This allows full control of blade height adjustment.

The AFR 300 C Bridge Saw can also cut 45 degree bevel miter cuts. Simply loosen the hand knobs on each side of the bridge and manually tilt the entire bridge over to 45 degrees and tighten up the knobs. This feature allows very tight miter accuracy when cutting 45 degrees.

The cutting bed of AFR 300 C Stone Bridge Saw is made up of Metal Slats. This allows solid support of the cutting piece, allows the water to drain back down in the water tank, and allows easy access to the water tank if something falls in, or when the tank needs to be cleaned.

The water tank on the AFR holds 64 gallons of water. By having an integrated water system, including a 1/2 HP water pump, built right into the AFR, it allows continuous and correct water flow back to the blade for water lubrication. Additionally this saves a lot of water by recycling the water. 

The AFR comes complete with a full 1 year manufacturers warranty.

Manual bridge tilt from 90° to 45° to carry out bevel cutting.
Manual adjustment of cutting depth.
Fixed worktable with epoxy powder painted steel slats.
Takes blades from 10"-14"
Water tank with built-in recycling pump.
Max Depth of Cut: 4"

Main motor (special voltage) Single-phase
• Power 2,2 kW (3HP)
• Voltage 230 V~
• Frequency 60 Hz
• Rotation speed 3400 RPM

Water recycling pump (standard) Single-phase
• Power 60 W (1/12HP)
• Voltage 230 V~
• Frequency 50 Hz
• Head 2,5 m (8,2 ft)
• Capacity 25 l/min. (6,6 gal/min.)

Accessories included:
• Side extension table (2 pieces).
• Side stop (1 piece).
• Set of service tools.

Length: 12'2"
Width: 5'6"
Height: 4'6"

Weighs 719 lbs

Water tank capacity: 64 gallons 

This item also includes a FREE 14" Diamond Blade

Write a review

Please login or register to review

Bench saw model AFR300C-CE 1-phase 2.2KW 230V 60Hz 3400rpm

  • Brand: Achilli
  • Product Code: 14401
  • Availability: In Stock
  • $7,550.00

Tags: Achilli AFR 300 C Manual Bridge Saw 10' Cut for Granite, Engineered Stone, Marble, Ceramic, and Porcelain Materials