This Super Slayer 1-3/8" x 5/8 -11 High Speed Dry Cutting Core Bit will dry cut through a 3/4" thick slab of granite at high speeds. In our tests on different 2 cm slabs this core bit ran from 20 to 30 seconds for each hole. The reason for this incredible speed is this bit incorporates Arix diamond alignment in the segments so it is easily the fastest core bit on the market today! With this bit you even get diamond brazed to the inside and the outside of the barrel so it will give you cleaner holes while trimming down the core for easier core ejection.
This diamond core bit can be run wet or dry and will drill over a hundred holes in granite or other natural stone at cutting speeds that are just incredibly fast! The faster you run this bit the faster it will cut, but it will also wear faster so find your happy medium and get the most bang for your buck! If you fabricate granite countertops this core bit is for you! These high speed core bits can be used to drill through materials as thick as 60mm.
Slayer - for Killer Performance!
- The best option
- Dry or wet cutting
- 5/8"-11 threaded arbor
- Arix diamond alignment
- Diamond brazed on both sides of barrel
These segmented high speed dry core bits for cutting stone are laser welded and can be run with or without water. They are excellent for cutting granite slabs and will cut through a 1 1/4" granite slab in just seconds! These core bits provide long life and if you are cutting stone dry, these core bits are your best option. They are extremely aggressive and are made for heavy daily use. The 1 3/8" bits are used for spigot holes in countertops and are equipped with a 5/8" -11 threaded arbor to screw onto any contractor's grinder.
1 3/8 Inch Super Slayer Dry Stone Core Bit
- Brand: Slayer Diamond
- Product Code: VCBX1375
- Availability: In Stock