5 Best Dust Extractors for Concrete Grinding
Concrete dust doesn’t just make a mess. It clogs filters, violates OSHA silica rules, and can shut down a job site if an inspector shows up at the wrong time. If you’re grinding slabs all day, you already know a shop vac won’t cut it, and you’re here searching for the best dust extractor for concrete grinding because your current setup keeps losing suction or spitting dust back into the air.
This guide gets straight to the answer. We tested and compared five dust extractors built for the airflow and fine particulate that concrete grinding produces, looking at CFM ratings and filtration class rather than marketing claims. Each option here handles the silica dust standard grinders and shrouds throw off, without you having to guess whether it’ll hold up past the first bag change.
Below, you’ll find our picks ranked by performance, along with what separates a HEPA-rated extractor from a vacuum that just moves dust around. We cover which units pair best with specific grinders, what tank size actually means for a full workday, and where you can cut costs without sacrificing suction. If you fabricate stone, tile, or masonry for a living, this list is built for your shop, not a homeowner’s garage.
1. Husqvarna DE130H
The Husqvarna DE130H sits at the top of this list because it’s built specifically for grinding, not general shop cleanup. It pairs directly with Husqvarna grinders and most other brands through a standard hose connection, and it moves enough air to keep a shroud from choking mid-pass. If you’re grinding coatings, leveling floors, or prepping slabs for epoxy, this is the extractor most concrete crews already trust on the floor.
A dust extractor is only as good as the airflow it holds at the tool, and the DE130H holds it longer than most competitors in its class.
Key features
The DE130H runs on a longopac continuous bagging system, which means you never open the tank to a cloud of silica dust. It also uses a self-cleaning filter that pulses automatically, so suction doesn’t drop off after twenty minutes the way it does on cheaper units.
- 132 CFM airflow rating
- Automatic filter shaking, no manual reset needed
- Longopac bagging keeps dust sealed during disposal
- Compatible with most 1.5 to 2-inch grinder hoses
- HEPA-rated filtration for OSHA silica compliance
Who it’s for
This unit fits daily grinding operations, especially floor prep crews and stone shops running grinders for hours at a stretch. If your business does volume work, coatings removal, or polished concrete, the DE130H handles the continuous load without the suction sag you’d see on a shop vac converted for dust work.
Pricing
Expect to pay in the range of $1,800 to $2,200 depending on the retailer and whether it comes bundled with hose kits or replacement bags. It’s not the cheapest entry on this list, but the bagging system alone saves labor hours over a season of daily disposal.
2. Festool CT 36 AC HEPA Dust Extractor
Engineered more for precision trades than heavy floor grinding, the Festool CT 36 AC still earns a spot on this list because of its variable-speed suction and near-silent operation. Fabricators running smaller grinders or handheld polishers on countertops and tile often prefer it over bulkier floor units. It’s compact enough to fit in a van, yet it still holds a HEPA filtration rating that meets OSHA silica requirements for indoor work.
Precision shops need suction control as much as raw power, and the CT 36 AC delivers both without shaking a job site apart.
Key features
This extractor automatically adjusts suction based on the tool it’s connected to, which matters when you’re switching between a small polisher and a larger grinder.
- 151 CFM peak airflow
- Automatic tool-triggered start and stop
- Bluetooth-compatible remote start module
- 9.5-gallon tank with disposable bags
Who it’s for
Countertop fabricators and tile installers doing detailed work benefit most, since this best dust extractor for concrete grinding tasks on smaller scale outperforms bulkier units in tight spaces.
Pricing
Budget around $800 to $950 for the base unit, with hose kits sold separately.
3. Dustcontrol DC 2900 Eco
The Dustcontrol DC 2900 Eco is a longopac-style extractor built for crews who need serious airflow without stepping up to a full industrial rig. It’s a Swedish design that’s been running on European job sites for years before catching on with US concrete crews, and it shows in the build quality of the motor housing and filter cage. Grinding contractors who need a machine that runs all shift without babysitting tend to land on this unit.
When a filter clogs mid-slab, you lose money standing around, and the DC 2900 Eco is built to avoid that stoppage.
Key features
This extractor pairs a longopac bagging system with a low-noise motor, which matters on indoor jobs where dust compliance and sound limits both apply.
- 165 CFM airflow rating
- Automatic filter cleaning cycle
- Longopac bag system for sealed disposal
- 6.6-gallon capacity before bag change
Who it’s for
This machine suits mid-size grinding crews running one or two grinders off a single extractor, particularly on floor prep and coatings removal jobs where downtime costs more than the equipment itself.
Pricing
Expect to pay $1,600 to $1,900 for the base unit, with longopac bag refills sold separately by the case.
4. Pullman-Holt 102 HEPA Vacuum
The Pullman-Holt 102 takes a different approach than the longopac systems above. Instead of continuous bagging, it runs a true HEPA cartridge filter housed in a rugged stainless steel drum, which makes it a favorite among restoration crews who move between concrete grinding and water cleanup on the same job. It’s not built for eight-hour marathon grinding sessions, but it holds its own on shorter runs where filtration matters more than raw airflow.
A dust extractor built for restoration work has to survive drops, spills, and dust in the same shift, and the 102 does exactly that.
Key features
Stainless construction sets this unit apart from the plastic-tank competitors on this list.
- 130 CFM airflow rating
- True HEPA cartridge filter, washable and reusable
- Wet and dry capability in one unit
- 10-gallon stainless steel drum
Who it’s for
Restoration contractors and smaller masonry crews doing occasional grinding alongside water damage or cleanup work get the most value here. If your business only grinds part-time, this unit skips the cost of a dedicated bagging system.
Pricing
Expect to pay $700 to $850 for the standard configuration, with replacement HEPA cartridges running separately.
5. Bosch VAC090S Dust Extractor
The Bosch VAC090S rounds out this list as the entry point for crews who need real dust control without buying into a full industrial system. Bosch built this extractor around job site portability, and it pairs well with their own line of grinders while still accepting standard hose fittings from other brands. Fabricators picking up their first dedicated extractor often start here before moving to a longopac system once volume grows.
Every serious dust setup starts somewhere, and the VAC090S gives smaller crews a legitimate entry point instead of a shop vac workaround.
Key features
This unit runs a semi-automatic filter cleaning system that you trigger manually, which keeps the price down compared to fully automatic units above.
- 106 CFM airflow rating
- HEPA filtration for silica compliance
- 9-gallon polyethylene tank
- Onboard hose and cord storage
Who it’s for
Smaller contractors, side-work fabricators, and crews grinding a few hours a week fit this unit best. It won’t outperform the DE130H on a full slab job, but it handles routine grinding without the price tag of the units above it.
Pricing
Expect to pay $500 to $650 for the base unit, making it the most affordable HEPA-rated option on this list.
Finding the right fit for your job site
Matching the extractor to your workload matters more than chasing the highest CFM number on the spec sheet. A crew grinding slabs eight hours a day needs the Husqvarna DE130H or Dustcontrol DC 2900 Eco, while a fabricator handling countertops a few hours a week gets plenty of value from the Bosch VAC090S. Restoration contractors juggling wet and dry cleanup should stick with the Pullman-Holt 102, and shops doing precision indoor work will lean on the Festool CT 36 AC.
Whatever unit you land on, pair it with a properly rated shroud and hose diameter, since even the best dust extractor for concrete grinding underperforms when the airflow gets choked before it reaches the tool. Buying the right accessories matters just as much as the extractor itself.
If you’re outfitting a crew with grinders, shrouds, or replacement filters to match any of these systems, check out the full lineup at DeFusco Industrial Supply.
