K3000 Wet Features Dust Free Cutting

 

Free shipping from factory warehouse

Blade not included

General Info

 

With the introduction of the K3000 wet, it is now possible to do smaller cutting jobs indoors with a minimum of dust and slurry. Using the newly developed wet cutting kit with specially designed nozzles in combination with the double insulated rotor and GFCI (Ground Fault Circuit Interrupter) gives the user the advantage of an electric power cutter with efficient dust suppression.

By using a direct water supply and a governing valve, the water usage can be kept to a minimum to supply enough water to suppress the dust but not cause excessive slurry. The reduction valve and the design of the nozzles ensure a constant and uniform jet of water onto the blade at pressures ranging from 7.3 – 145 psi (0.5 – 10 bar)

The K3000 Electric is not an angle grinder, it is a concrete saw from the ground up.

• High power, a big 1800 w (120 v)
• Capacity for 14" cutting blade (5" cutting depth)
• Forward rotation reduces the risk of jamming and kickback
• Good distance between handles for safe control and reduced load
• Front handle that facilitates both vertical and horizontal cutting
• Comfortable patented design of the rear handle makes your job easier
• Elguard', the advanced electronic overload protection, warns you by pulsating the rpms when you're approaching overload
• Well-dimensioned bevel gear brings high durability, minimal power loss and low noise level
• SoftStart , this feature gives the saw a gradual start when the trigger is pulled. This makes it so the saw does not initially jump to full power. This feature gives the operator more control
• Vacuum outlet in blade guard (12")
• Pulling rotation reduces the risk of jamming and kickback.

Elgard the advanced electronic overload protection varies the rotation speed to warn of approaching overload.
Electronic soft start.

Quick locking of the spindle and large outlet in the blade guard simplify blade changes.

 

Husqvarna K3000 Wet Cutting Electric Cut Off Saw
Power, Watts		1800 Watts
Voltage, Amps		15 Amp / 120V Electric
Blade Capacity		14"
Depth of Cut		5"
Max Speed		4,500 rpm
Weight		19.5 lbs

 

No Sales Tax In: Alabama, Alaska, Arkansas, Colorado, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Kansas, Michigan, Minnesota, Missouri, Montana, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Texas, Utah, Vermont, Virginia, Washington, Washington D.C., West Virginia, Wyoming