One Stop Double-Sided A-Frame

When high quality and versatility is a must this is for you! This shop ready A frame may be used with slabs of stone or sheets of glass. 

Work load limit

- Lifting with fork inserts: 4400 lbs (2000 kg)
- Lifting with eyelets: 2200 lbs (1000 kg)
- Rolling capacity: 2200 lbs (1000 kg)
- Stationary w/o casters: 4400 lbs (2000 kg)

The correct way of tightening the rubber lined securing bars for the Abaco One Stop A-Frame.

As shown to the left, the ratchet hook needs to run under the bar and back around to the tie down point. This will ensure that the rubber lined securing bar stays in position and does not lift up when tightening.

It is recommended that the securing bars stand level with or taller than the slabs itself. The securing bars will not work to its full potential if your material does not stand within the height of the bars. This is because the straps are not as strong as the ratchet securing bar.

Please Note:

The securing bars are not to be used when carrying full slabs of material. To secure a full size slab on the A-frame use only the straps.

Forklift Users

Always make sure your forks are fully inserted into the A-Frame before lifting. This will ensure a proper and secure lift.

The correct way of removing the casters

Make sure the load is fully secured before removing the casters.

• Lift A-frame off the ground, high enough for you to have proper access to the casters.
• With one hand holding the caster, use your other hand to pull out the pin. This will release the caster from the A-frame.
• Please place the caster in its holder. If you remember to do this, you will never have to worry about losing your casters.

Free Shipping on this product in the continental USA. Please provide us with a commercial or an industrial address for the destination as this is coming by freight carrier. 

Since the freight cost is figured into this item and it is shipped to you with no freight charge, if you purchase more than one of this item, or if you purchase another ABACO item with this order and they can be shipped together we will combine the shipping charge and discount the freight charge to you. Simply look for the email with the new lower total charge or contact us here.