Diamond Services SRL 14" X 60/50mm X 18mm silent core stone blades

This Italian made blade is excellent quality. It has sandwich segment and a 3 piece laminated core for lower decibels when running in the shop. When used with saws running 10hp or greater it gives the fastest cut, but it also has excellent results on the low powered machines

It is possible to cut with them both marble and granite even if the smooth of the cut on the marble is not the same of the one you would
obtain using a blade explicitly developed for this use.

Regarding the suggested RPM is the typical one of a granite blade:
1.650-1.900 RPM for a 14" inch on the granite.

With an 18mm tall segment this blade provides excellent performance.

*18mm segment height
*60mm-50mm arbor fits most every bridge saw
*Aggressive cutting speeds
*Top available Quality!
*3 Piece laminated core

This free cutting blade is designed for wet cutting on a bridge saw. It will give aggressive smooth cuts when used on granite and other slabs! It can be run with high performance on both low and high powered bridge saws.

If you run a bridge saw you owe it to yourself to put this blade to work. It will give you the cheapest cost per cut.

Dimensions:

Core Diameter13.25"
Overall Diameter 14.75"
Arbor Hole 60mm (bushed to 50mm)
Segment Height 20mm
Segment Width .130"