Revolution XT Tile Ring Saw Double Sided Blade

This high quality tool makes precision cutting possible. Now you can cut curves or straights with a saw that runs whisper quiet, doesn't throw water, uses the same blade for all materials, weighs only 56lbs and can rip a 24" tile or diagonally cut 18" tiles from corner to corner with little or no chipping. Introducing the New Revolution XT Ring Saw Package complete with the saw, sliding tray, rails, stand, all the jigs and the double-sided blade which cuts forwards and backwards!

With similar construction to your standard high quality 10" tile blade, the Revolution XT ringsaw blades are very similar to the solid 10" diameter blades you will find on most high quality wet saws. The difference is that these blades have no center, giving you the ability to not only cut straight lines but also make tight radius cuts - as tight as a 1/4" radius, cutting both forwards and backwards. Fantastic for art, finish, or mosaic work
Because the blades run at a much slower R.P.M. than any tile saw but with far more torque, they give the user a much higher quality cut with far less chipping and superior blade life. Since these blades are driven from the outside they have several advantages over conventional tile blades:

A) The ability to make STRAIGHT or CURVE cuts.

B) Easily cut a slice off the edge of your material. The blade remains stable and rigid without wandering.

C) The ability to have diamond coating on the front and back, (with double sided blade included at no additional cost) making FORWARD as well as BACKWARD cutting possible.

D) Use the same blade for all materials. There is no need to change blades.

E) Material will never glaze over, so there is no need to ever dress the blade.

This saw runs whisper quiet and since the blade goes through a water bath it does not make a mess like traditional tile saws do. With the sliding conveyor cart in place this saw will rip a 24" tile and diagonally cut a 18" square tile from corner to corner. Without the sliding cart the only limitation is how big a piece you can hold while passing it through the cutting area.
This saw is designed for tiles and slabs and with the guard in place it will cut any piece up to 2" in thickness, but the guard may be removed and then you can cut up to 4 1/2" thick materials. That means this saw can also be used for bricks, pavers, etc..

New slider carriage

This Steel table has a rubber top on it to prevent tiles from slipping. The jigs are magnetic so they magnetically stick where you place them on the table. With the included circle maker (which may be used to make perfect circles on tiles or stone up to 3/8" thick) all shapes are possible! You can cut arcs or circles, make perfectly straight cuts, and even slice off as little as 1/8" without blade wander.

This ring saw packages comes complete with:

The saw
The double sided blade
The sliding carriage
Two 45 degree angle stops
Circle Maker (not shown)
The stand (not shown)

This new style of saw has NO LIMITATIONS for the professional user. This 1hp motor is designed to burn out 100 of these blades and you can't work this saw hard enough to even make the motor get warm, much less make it get hot!
Quiet, dependable, clean cutting with excellent blade life are only a few of the reasons our customers love them. A revolutionary idea whose time has come. What are you waiting for? Order yours today and we will give you free shipping in the continental USA!