10 Inch Revolution XT Glass Blade

10 Inch Revolution XT Glass Blade

Brand: Gemini Saw Company Inc
Product Code: GEM0909
Reward Points: 0
Availability: In Stock
Price: $129.90

10 Inch Revolution XT Glass Blade

This blade is designed for those of you who want to cut any type of glass chip free. It has a very fine diamond grit so there is virtually no clean up required after the cut. The Glass Blade, single sided is for straight cuts and basic curves as tight as 1 inch radius in glass leaving the smoothest cut of any saw in the industry. All blades cut all materials well but this is the best one for glass.

The Revolution blades are very similar to the solid 10 inch diameter blades you will find on most high quality wet saws. The difference is that these blades have no center, giving you the ability to not only cut straight lines but also make tight radius cuts. These blades run at a much slower R.P.M. than any tile saw but with far more torque, so they give the user a much higher quality cut with far less chipping and superior blade life.

The single sided Glass Blade has a 10 inch diameter. It is a sintered diamond blade designed for forward cutting and will do as tight as a 3/4 inch radius on your curved cuts. With this blade you also get a 1 inch cube dressing stone just in case you need to true up the blade, but you'll probably never use it unles you get into real hard materials like technical ceramics.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: